Electric Power Trowel Machine
Electric Power Trowel machine for epoxy-based coatings
Electric power float for epoxy-based coatings for floors with colored granules, and floor coverings made of natural stone.
Included: Machine, handlebar, 1 trowel disc with a diameter of 500 mm, 20 trowelling blades (mounted) and key for removing the trowel disc.
We have different blades for different applications for both the electric power trowel and the battery power trowel.
Grey Plastic: Made to e used on floor there you scatter the sand into the surface of a slurry and then trowel the surface to a smooth and nice surface.
Compact blades (made in steel): Made to be used on floor where you scatter the sand into the surface of a slurry and then trowel the surface to a smooth and nice surface. Steel blades are faster than plastic, but the noise from the blades is higher and there is a risk that you will get thin “trowel-roses” in the surface when the floor is ready.
White flex: Made to be used on when you mix the sand and epoxy to a mortal and bring the coating on the floor with a screedbox. Works also very well on scatter-system if you put a compact blade in steel behind each White flex.
STD-blades: Made to be used on when you mix the sand and epoxy to a mortal and bring the coating on the floor with a screed box.
Stone Carpet Blades: Made to be used on “stonecarpet floors”, floors with stones in the size of 2-3 mm, 3-4 mm and 4-6 mm.
|Motor power:||0,2 kW|
|Voltage:||1 x 230 V|
|Work width:||475 mm / 19″|
|Weight:||14 kg / 31 lbs.|
|Measure:||50x100x50 cm / 19,7”x 40”x19,7”|